Forum Index

 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages    Log inLog in 

inDRIVE black screen

 
Post new topic   Reply to topic     Forum Index -> Support
View previous topic :: View next topic  
Author Message
grobda



Joined: 29 Jul 2014
Posts: 2

PostPosted: Tue Jul 29, 2014 10:53 pm    Post subject: inDRIVE black screen Reply with quote

Hi

both carts arrived, Snes flash cart works fine, megadrive does nothing, black screen.

Bought altera usb blaster cable and reflashed, that worked;

Info (209060): Started Programmer operation at Tue Jul 29 16:45:17 2014
Info (209017): Device 1 contains JTAG ID code 0x020A10DD
Info (209018): Device 1 silicon ID is ALTERA04-0
Info (209044): Erasing MAXII/MAXV configuration device(s)
Info (209019): Blank-checking device(s)
Info (209023): Programming device(s)
Info (209021): Performing verification on device(s)
Info (209011): Successfully performed operation(s)
Info (209061): Ended Programmer operation at Tue Jul 29 16:45:24 2014

but still black screen

any advice?
Back to top
View user's profile Send private message
HardWareMan
Гуру, Super DONATE +15000
Гуру, Super DONATE +15000


Joined: 19 Dec 2010
Posts: 291

PostPosted: Fri Aug 01, 2014 10:25 pm    Post subject: Reply with quote

Any info about system setup? Did you try to boot without SD card and hold ABC buttons together?
Back to top
View user's profile Send private message
grobda



Joined: 29 Jul 2014
Posts: 2

PostPosted: Sat Aug 02, 2014 6:29 pm    Post subject: Reply with quote

tested on md1 and md2 with/without sd card with/wihtout abc pressed every combination.

altera .pof 2.05/2.06/2.07 programming works fine with usb blaster but always get black screen.

read on russian forums about building parallel port adaptor to reformat flash roms? but not too clear with google translate
Back to top
View user's profile Send private message
HardWareMan
Гуру, Super DONATE +15000
Гуру, Super DONATE +15000


Joined: 19 Dec 2010
Posts: 291

PostPosted: Sat Aug 02, 2014 7:51 pm    Post subject: Reply with quote

Yes. This thread is about flash content restore. But for now programmer works only with LPT based ByteBlaster.
1. Use CPLD Recover for prepare to programm.
2. Use Programmer for burn BootLoader into flash.
3. Use work CPLD Core for restore CPLD logic.
4. Use OS update for reflash entire OS into flash by BootLoader.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic     Forum Index -> Support All times are GMT + 7 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum